Stiebel Eltron DHC-E Classic Series Tankless Water Heaters
Featuring the same industry-leading water flow and temperature based thermostatic control and power modulation found in Stiebel Eltron's flagship Tempra Series whole house heaters, the Stiebel Eltron DHC-E Classic Series eletric tankless water heaters are the most advanced point-of-use tankless water heaters on the market today. Simply set the temperature on the front of the water heater to anywhere from 86° (30°C) and 140° (60°C) and enjoy a constant temperature that does not deviate.
Ranging in power from 7.2 - 12 kw's the DHC-E Classic series fills in just below the Tempra Series for lower flow single applications. They are ideal for commercial washrooms, kitchens, bathroom sinks, and many other point of use applications. Like all Steibel Eltron tankless water heaters, the DHC-E Classic Series only operate when hot water is being demanded, so are extremely energy efficient. Due to their small size, the DHC-E Classic Series can be easily installed in almost any location including in cabinets.
| Stiebel Eltron DHC-E Classic Series Tankless Water Heater Models & Specifications | |||
|---|---|---|---|
| Stiebel Eltron DHC-E 8/10 Classic |
Stiebel Eltron DHC-E 12 Classic |
||
| Thermostatically Controlled? | Yes, temperature control and full power modulation based on flow rate and incoming water temperature. |
||
| KW | 9.6 KW @ 240v / 7.2 KW @ 208v | 12 KW @ 240v / 9 KW @ 208v | |
| Voltage: | 208 - 240 volts / single phase / 50 - 60 Hz | ||
| Max. Amps: | 40 AMPS @ 240v / 35 AMPS @ 208v | 50 AMPS @ 240v / 44 AMPS @ 208v | |
| Breakers Required:* | 1 x 40 AMP breaker @ 240V or 1 x 35 amp breaker at 208V (depends on local codes) |
1 x 50 AMP breaker @ 240V or 1 x 50 amp breaker at 208V (depends on local codes) |
|
| Wiring:* | Minimum #8 AWG Copper (depends on local codes) |
Minimum #8 AWG Copper (depends on local codes) |
|
| Dimensions: | 14.25 x 7.9 x 4.1" (36 x 20 x 11 cm) | ||
| Weight: | 5.9 lbs (2.7 KG) | ||
| Pipe Fittings: | 1/2" NPT | ||
| Energy Efficiency: | 99%+ | ||
| Activation Flow Rate: | 0.37 GPM / 1.4 LPM | ||
| Max. Water Pressure: | 150 psi | ||
| Warranty: | Manufacturer's 3 Year Warranty | ||
| Safety: | ETL Listed (US / Canada) | ||
| Protection: | microprocessor-based thermostatic temperature control (flow rate and temperature modulating) with thermal hi-limit cut-out switch | ||
| Stiebel Eltron DHC-E 8/10 | Stiebel Eltron DHC-E 12 | ||
