Stiebel Eltron DHC Series Tankless Water Heaters
Manufactured by Stiebel Eltron in Germany, the DHC series tankless water heaters are built in an ISO 9001 certified factory. They are ideally suited for applications that require a low flow rate of hot water and have a constant flow rate, including bathroom sinks, kitchens, public washrooms, emergency eyewash stations, etc.
As with all of Stiebel Eltrons tankless water heaters, the DHC series are extremely efficient. Power to the units is regulated by a sophisticated water flow sensor, allowing the units to only receive power when the water is flowing. This eliminates the need to have hot water sitting waiting for use at all times, thereby avoiding standby thermal heat loss. Due to their diminutive stature the DHC series tankless water heaters can be installed in virtually any location, including in cabinets or closets close to the actual point of use.
| Stiebel Eltron DHC Series Point-of-Use Tankless Water Heaters | ||||||||
|---|---|---|---|---|---|---|---|---|
| DHC 3-1 Classic |
DHC 3-2 Classic |
DHC 4-2 Classic |
DHC 4-3 Classic |
DHC 5-2 Classic |
DHC 6-2 Classic |
DHC 8-2 Classic |
DHC 10-2 Classic |
|
| KW | 3.0 KW @ 120V | 3.3 KW @ 240V (2.5 KW @208V) |
3.8 KW @ 240V (2.9 KW @208V) |
4.5 KW @ 277V | 4.8 KW @ 240V (3.6 KW @208V) |
6.0 KW @ 240V (4.5 KW @208V) |
7.2 KW @ 240V (5.4 KW @208V) |
9.6 KW @ 240V (7.2 KW @208V) |
| Voltage: | 110-120 volts single phase 50 - 60 Hz |
208-240 volts single phase 50 - 60 Hz |
208-240 volts single phase 50 - 60 Hz |
277 volts single phase 50 - 60 Hz |
208-240 volts single phase 50 - 60 Hz |
208-240 volts single phase 50 - 60 Hz |
208-240 volts single phase 50 - 60 Hz |
208-240 volts single phase 50 - 60 Hz |
| Max. Amps: | 25 AMPS @ 120V | 14 AMPS @ 240V (12 AMPS @208V) |
16 AMPS @ 240V (14 AMPS @208V) |
17 AMPS @ 277V | 20 AMPS @ 240V (18 AMPS @208V) |
25 AMPS @ 240V (22 AMPS @208V) |
30 AMPS @ 240V (26 AMPS @208V) |
40 AMPS @ 240V (35 AMPS @208V) |
| Breakers Required:* | 25 AMP @ 120V | 15 AMPS @ 240V (15 AMPS @208V) |
20 AMPS @ 240V (15 AMPS @208V) |
20 AMPS @ 277V | 20 AMPS @ 240V (20 AMPS @208V) |
25 AMPS @ 240V (25 AMPS @208V) |
30 AMPS @ 240V (30 AMPS @208V) |
40 AMPS @ 240V (35 AMPS @208V) |
| Wiring:* | Min. #10 AWG Copper | Min. #14 AWG Copper | Min. #12 AWG Copper | Min. #12 AWG Copper | Min. #12 AWG Copper | Min. #10 AWG Copper | Min. #8 AWG Copper | Min. #8 AWG Copper |
| Dimensions: | 14.25 x 7.9 x 4.1" (36 x 20 x 11 cm) | |||||||
| Weight: | 4.6 lbs (2.1 KG) |
5.3 lbs (2.4 KG) |
5.3 lbs (2.4 KG) |
4.6 lbs (2.1 KG) |
4.6 lbs (2.1 KG) |
4.6 lbs (2.1 KG) |
5.3 lbs (2.4 KG) |
5.3 lbs (2.4 KG) |
| Activation Flow Rate: | 0.32 GPM (1.2 LPM) |
0.32 GPM (1.2 LPM) |
0.42 GPM (1.6 LPM) |
0.42 GPM (1.6 LPM) |
0.42 GPM (1.6 LPM) |
0.47 GPM (1.8 LPM) |
0.69 GPM (2.6 LPM) |
0.79 GPM (3.0 LPM) |
| Energy Efficiency: | 99%+ | |||||||
| Pipe Fittings: | 1/2" NPT | |||||||
| Max. Water Pressure: | 150 psi | |||||||
| Warranty: | Manufacturer's 3 Year Warranty | |||||||
| Safety: | ETL Listed (US / Canada) - Independently tested to meet U.S. and Canadian safety standards | |||||||
| Protection: | scald guard thermostat and thermal hi-limit cut-out switch | |||||||
| Stiebel Eltron DHC-3-1 Classic |
Stiebel Eltron DHC-3-2 Classic |
Stiebel Eltron DHC-4-2 Classic |
Stiebel Eltron DHC-4-3 Classic |
Stiebel Eltron DHC-5-2 Classic |
Stiebel Eltron DHC-6-2 Classic |
Stiebel Eltron DHC-8-2 Classic |
Stiebel Eltron DHC-10-2 Classic |
|
